3/1/2024 0 Comments Iei wiegand keypad![]() In addition, use the anti- oxidant grease pack for the wire harness connectors. For additional protection, install the provided foam gasket between the keypad and the back box. For outdoor installations, use a UL Listed weatherproof back box and seal the wire entry locations with silicone and provide a drain hole. An appropriate range is typically between 48 and 52 inches on center off the floor. Mounting height can vary depending on requirements. The keypad is designed to be flush mounted using a standard UL Listed single-gang electrical box. The 2000e/eM keypads were evaluated by UL, in Wiegand Front End mode, for use only with the IEI Hub Max II and Hub MiniMax II products used in conjunction with the Wiegand Interface Module. The locking device and all inputs and outputs are connected to the control panel. The control panel maintains the users and programming options and makes all the access control decisions. When you enter a code on the keypad it is then sent to the control panel as Wiegand card data, depending on which format you've programmed it for. In Wiegand Front End mode, a separate Wiegand Access Control panel is required. The 2000e/eM keypads were evaluated by UL, in Secured Series Front End mode, for use only with the IEI Hub Max II and Hub MiniMax II products. The locking device and all inputs and outputs are connected to the controller. The IEI Secured Series Controller maintains the users and programming options and makes all the access control decisions. Regulate access, prevent unauthorized entry, and protect yourself against valuables or sensitive information ending up in the wrong hands with Linear IEI’s 2000eM access control keypad. In Secured Series Front End mode, an IEI Secured Series Controller is required. The lock and all other inputs and outputs are connected directly to the keypad. In this mode, all the users and other programming options are maintained within the keypad and no additional controller is required. Refer to the programming section for details about selecting each mode.īy default, the keypad is programmed for Standalone Mode. Below is a brief explanation of each mode. ![]() The 2000e/2000eM keypad has three operating modes: Standalone Mode, Secured Series Front End Mode and Wiegand Front End Mode. Questions can also be submitted through our website atĮnd User: Please contact your service company. Service Company: To contact IEI’s Technical Support department, call 1- 80, Monday through Friday. – 22 AWGġ.0x (“1” is the major version “0” is the minor version “x” is a minor version, reserved for bug fixes, which is indicated with a letter, such as “a”.) Note: This is total maximum current including keypad and output module.ġ000 Ft. The unit is UL 294 Listed.Keypad with Output Expansion Module (2000- 8EX) Current Requirements (Max) The keypad is flush mountable and comes with LED lights and a sounder for relay and alarm status notification. Offering astounding versatility, the keypad can be programmed as a standalone device or work with an IEI Secured Series or Wiegand Panel, depending on the needs of your access control system. The IEI 2000E is an access control keypad that features hardened backlit keys for durable and reliable performance in both indoor and outdoor environments. IEI 2000E Series E Style Flush-mount Backlit Access Control Keypad ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |